Anselm Franz
|
|
Anselm Franz (1900-1994) was a pioneering jet engine engineer, known for the development of the Jumo 004 turbojet in Germany during World War II, and his work on turboshaft designs in the US after the war.
Born in Schladming, Austria, Franz studied mechanical engineering at the Technical University of Graz and earned a doctoral degree from the University of Berlin. Franz worked as a design engineer at a company in Berlin, where he developed hydraulic torque converters. In 1936, he joined Junkers, and during much of the 1930s he was in charge of supercharger and turbocharger development.
Meanwhile Hans von Ohain's first engines were being run at Heinkel, although there was little official interest. Helmut Schelp and Hans Mauch, at the Reichsluftfahrtministerium (RLM), tried to keep development moving through the "back door", attempting to interest existing engine companies in jet development. On one such visit in early 1939 Otto Mader at Junkers said that even if the idea was worth looking at, he had no one to run such an effort. Schelp suggested that Franz would be perfect for the job, given his experience in turbocompressor work.
The program was set up later in 1939, initially consisting of a very small team drawn from the supercharger division. Unlike the Heinkel designs, the Jumo would use an axial compressor, as opposed to the centrifugal compressors, in order to have a smaller frontal area. With that exception the design was otherwise very conservative, a series of six flame cans were used for combustion instead of a single annular burner, and the compression ratio was kept low at 3.14:1. Franz decided to focus on development time instead of performance in order to avoid having the program killed off if it didn't produce a working engine quickly.
The first testbed run of the experimental 004A took place in the spring of 1940, and had full speed runs in January 1941. The engine flew on an Messerschmitt Bf 110 on March 15, 1942, and after a number of these A models were delivered, the Messerschmitt Me 262 first took to the air with the 004A on July 18th. The RLM was finally interested in the design, and ordered 80 production quality versions. The new 004B version included a number of changes, but ran into difficulty with vibration and fatigue problems that greatly delayed its service entry. It was not until the spring of 1944 that the engine was routinely lasting 50 hours and could enter full production. It nevertheless went on to power the majority of the Luftwaffe's jet designs.
After the war Franz moved to the US, and worked for a time with the USAF on engine-related issues. In 1951 he was hired to set up a new turbine division at Lycoming's otherwise unused plant in Stratford, CT. Here he decided to focus on engine areas not currently served by the larger companies (GE and Pratt & Whitney), eventually settling on helicopter engines. His first design, the T53, would go on to be one of the most popular turboshaft engines in history, powering the Bell Aircraft UH-1 Huey and AH-1 Cobra helicopters, and the OV-1 Mohawk ground attack aircraft. He followed this success with the larger T55, later converting it into a small turbofan engine as well. In the 1960s he led development of a new design for tank use, which developed into the AGT-1500, used on the M1 Abrams
Franz retired from Lycoming in 1968, having risen to Vice President. He died in 1994, holder of the US Army Outstanding Civilian Service Medal, the R. Tom Sawyer Award from the American Society of Mechanical Engineers, and the Grand Decoration of Honor from Austria.de:Anselm Franz