Polystyrene

Polystyrene
Density	1050 kg/m3
Electrical conductivity(σ)	10-16 S/m
Thermal conductivity	0.08 W/(m·K)

Styrofoam redirects here. For the music band of the same name see Styrofoam (artist).

Polystyrene is a polymer made from the monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum. At room temperature, polystyrene is normally a solid thermoplastic, but can be melted at higher temperature for molding or extrusion, then resolidified. Styrene is an aromatic monomer, and polystyrene is an aromatic polymer.

Polystyrene was first manufactured by BASF in the 1930s, and is used in numerous plastic products. Pure solid polystyrene is a colorless, harder plastic with limited flexibility which can be cast into molds with fine detail. Polystyrene can be transparent or can be made to take on various colors. It is economical and is used for producing plastic model assembly kits, plastic cutlery, and many other objects where a fairly rigid, economical plastic of any of various colors is desired. Polystyrene fabricated into a sheet can be stamped (formed) into economic, disposable cups, glasses, bowls, lids, and other items, especially when high strength, durability, and heat resistance are not essential. A thin layer of transparent polystyrene is often used as an infra-red spectroscopy standard.

Polystyrene's most common use, however, is as expanded polystyrene, which is a mixture of about 5% polystyrene and 95% air. This is the lightweight material of which coffee cups and takeaway food containers are made. The voids filled with trapped air give expanded polystyrene low thermal conductivity. It is also used as insulation in building structures, as packing material for cushioning inside boxes, as non-weight bearing architectural structures (such as pillars) and also in crafts and model building, particularly architectural models. Foamed between two sheets of paper, it makes a more-uniform substitute for corrugated cardboard tradenamed Foamcore.

In the USA it is made by the Dow Chemical Company under the tradename Styrofoam. The word styrofoam is often used by the general public in the United States to indicate any brand of polystyrene foam (see genericized trademark).

Expanded polystyrene used to contain CFCs but other, more environmentally-safe blowing agents are now used.

Because it is an aromatic hydrocarbon, polystyrene is flammable and burns with an orange-yellow flame giving off soot, as opposed to non-aromatic hydrocarbon polymers such as polyethylene, which burn with a light yellow flame (often with a blue tinge) and no soot.

Resin identification code

The symbol for polystyrene developed by the Society of the Plastics Industry so that items can be labeled for easy recycling is Missing image
Recycle-resin-logos-lr_06.jpg


.

The Unicode character is &#9848, which will appear here if you have a suitable font installed: ♸.

Toughening

Pure polystyrene is brittle, but hard enough that a fairly high-performance product can be made by giving it some of the properties of a stretchier material, such as polybutadiene rubber. The two materials cannot normally be mixed due to the amplified effect of intermolecular forces (http://en.wikipedia.org/wiki/Polymers#Intermolecular_forces) on polymer solubility, but if polybutadiene is added during polymerization, it can become chemically bonded to the polystyrene, forming a graft copolymer which helps to incorporate normal polybutadiene into the final mix, resulting in high impact polystyrene or HIPS, often called "high impact plastic" in advertisements.

Acrylonitrile butadiene styrene or ABS (http://www.bpf.co.uk/bpfindustry/plastics_materials_Acrylonitrile_Butadiene_Styrene_ABS.cfm) plastic is similar to HIPS: a copolymer of acrylonitrile and styrene, toughened with polybutadiene. Most electronics cases are made of this form of polystyrene.

Styrene can be copolymerized with other monomers; for example, divinylbenzene for cross-linking the polystyrene chains.

External links

• Macrogalleria: Polystyrene (http://www.psrc.usm.edu/macrog/styrene.htm)
• http://www.plasticsindustry.org/outreach/recycling/2124.htm Society of the Plastics Industry site
• http://www.dow.com/styrofoam/
• http://www.polystyrene.org
• Arguments Against Polystyrene (http://www.verdant.net/nofoam.htm)bg:Полистирен

de:Polystyrol es:Poliestireno fr:Polystyrène nl:Polystyreen ja:ポリスチレン pl:Styropian zh:聚苯乙烯