Fiberglass
|
|
Fiberglass or fibreglass is material made from extremely fine fibers of glass. It is widely used in the manufacture of insulation and textiles. It is also used as a reinforcing agent for many plastic products; the resulting composite material, properly known as glass-reinforced plastic (GRP) or glass-fiber reinforced epoxy (GRE), is called "fiberglass" in popular usage.
Glassmakers throughout history have experimented with glass fibers, but mass manufacture of fiberglass was only made possible with the advent of finer machine-tooling. In 1893, Edward Drummond Libbey exhibited a dress at the World Columbian Exposition incorporating glass fibers with the diameter and texture of silk fibers. What is commonly known as "fiberglass" today, however, was invented in 1938 by Russell Games Slayter of Owens-Corning as a material to be used as insulation. It is marketed under the trade name Fiberglas (see genericized trademark).
| Contents |
Formation
Glass fiber is formed when thin strands of silica based or other formulation glass is extruded into many fibers with small diameters suitable for textile processing. Glass is unlike other polymers in that, even as a fiber, it has little crystalline structure (see amorphous solid). The properties of the structure of glass in its softened stage are very much like its properties when spun into fiber. One definition of glass is "an inorganic substance in a condition which is continuous with, and analogous to the liquid state of that substance, but which, as a result of a reversible change in viscosity during cooling, has attained so high a degree of viscosity and to be for all practical purposes rigid." (Loewenstein, 4)
The technique of heating and drawing glass into fine fibers has been known to exist for thousands of years; however, the concept of using these fibers for textile applications is more recent. The first commercial production of fiberglass was in 1936. In 1938, Owens-Illinois Glass Company and Corning Glass Works joined to form Owens-Corning Fiberglas Corporation. Until this time all fiberglass had been manufactured as staple. When the two companies joined together to produce and promote fiberglass, they introduced continuous filament glass fibers (Loewenstein, 2). Owens-Corning is still the major fiberglass producer in the market today.
Chemistry
The basis of textile grade glass fibers is silica, SiO2. In its pure form it exists as a polymer, (SiO2)n. It has no true melting point but softens up to 2000°C, where it starts to degrade. At 1713°C, most of the molecules can move about freely. If the glass is then cooled quickly, they will be unable to form an ordered structure (Gupta, 544). In the polymer it forms SiO4 4- groups which are arranged as a tetrahedron with the silicon atom at the center and four oxygen atoms at the corners. These atoms then form a network bonded at the corners by sharing the oxygen atoms.
The vitreous and crystalline states of silica (glass and quartz) have similar energy levels on a molecular basis, also implying that the glassy form is extremely stable. In order to induce crystallization, it must be heated to temperatures above 1200°C for long periods of time (Loewenstein, 6).
Glasstetra.jpg
Although pure silica is a perfectly viable glass and glass fiber, it must be worked with at very high temperatures which is a drawback unless its specific properties are needed. It is usual to introduce impurities in the form of other materials into the glass to lower its working temperature. These other materials also impart various other properties to the glass which may be beneficial in different applications. The first type of glass used was soda-lime glass or A glass. It was not very resistant to alkali. A new type, E-glass was formed that is alkali free (< 2%) and an alumino-borosilicate glass (Volf, 338). This was the first glass produced for continuous filament formation. E-glass still makes up most of the fiberglass production in the world. Its particular components may differ slightly in percentage, but must fall within a specific range. The letter E is used because it was originally for electrical applications. S-glass is a high strength formulation when tensile strength is the most important property. C-glass was developed to resist attack from chemicals, mostly acids which destroy E-glass (Volf, 340).
Since E-glass does not really melt but soften, the softening point is defined as, “the temperature at which a 0.55 – 0.77 mm diameter fiber 9.25 inches long, elongates under its own weight at 1 mm/min when suspended vertically and heated at the rate of 5°C per minute” (Lubin, 152). The strain point is where the glass has a viscosity of 10 14.5 poise. The annealing point, which is the temperature where the internal stresses are reduced to an acceptable commercial limit in 15 minutes. The viscosity at this point should be 10 13 poise (Lubin, 152).
Properties
Glass fibers are useful because of their high ratio of surface area to weight. However, the increased surface makes them much more susceptible to chemical attack.
Glass strengths are usually tested and reported of "virgin" fibers which have just been manufactured. The freshest, thinnest fibers are the strongest and this is thought to be due to the fact that it is easier for thinner fibers to bend. The more the surface is scratched, the less the tenacity is (Volf, 351). Because glass has an amorphous structure, its properties are the same along the fiber and across the fiber (Gupta, 546). Humidity is an important factor in the tensile strength. Moisture is easily adsorbed, and can worsen microscopic cracks and surface defects and lessen tenacity.
In contrast to carbon fibers, glass can undergo more elongation before it breaks (Gupta, 546).
The viscosity of the molten glass is very important. During drawing the viscosity is relatively low. If it is too high the fiber will break during drawing. If it is too low the glass will form droplets rather than drawing.
Manufacturing Processes
There are two main types of glass fiber manufacture and two main types of glass fiber product. First, fiber is made either from a direct melt process or a marble remelt process. Both start with the raw materials in solid form. They are mixed together and melted in a furnace. Then, for the marble process, the molten material is sheared and rolled into marbles which are cooled and packaged. The marbles are then taken to the manufacturing facility where they are inserted into a can and remelted. Then the molten glass goes to the bushing to be formed into fiber. In the direct melt process, the molten glass in the furnace goes right to the bushing for formation. (Lubin, 149)
The bushing is the most important part of the machinery. This is a small metal furnace containing nozzles for the fiber to be formed through. It is almost always made of platinum alloyed with rhodium for durability. Platinum is used because the glass melt has a natural affinity for wetting it. When bushings were first used they were 100% platinum and the glass wetted the bushing so easily it ran under after exiting the nozzle and accumulated on the underside. Also, due to its cost and the tendency to wear, it was alloyed with rhodium. In the direct melt process, the bushing serves as a collector for the molten glass. It is heated slightly to keep the glass at the correct temperature for fiber formation. In the marble melt process, the bushing acts more like a furnace as it melts more of the material. (Loewenstein, 91)
The bushings are what make the capital investment in fiber glass production expensive. The nozzle design is important also. The number of nozzles ranges form 200 to 1600 in multiples of 200. The important part of the nozzle in continuous filament manufacture is the thickness of its walls in the exit region. It was found that inserting a counterbore here reduced wetting. Today, the nozzles are designed to have a minimum thickness at the exit. The reason for this is that as glass flows through the nozzle it forms a drop which is suspended from the end. As it falls, it leaves a thread attached by the meniscus to the nozzle as long as the viscosity is in the range for fiber formation. The smaller the annular ring of the nozzle or the thinner the wall at exit, the faster the drop will form and fall away and the lower its tendency to wet the vertical part of the nozzle (Loewenstein, 94). The surface tension of the glass is what influences the formation of the meniscus. For E-glass it should be around 400 mN m-1 (Volf, 360).
The attenuation speed is important in the nozzle design. Although slowing this speed down can make coarser fiber, it is uneconomic to run at speeds for which the nozzles were not designed (Loewenstein, 94).
In the continuous filament process, after the fiber is drawn, a size is applied. This size helps protect the fiber as is wound onto a bobbin. The particular size applied relates to end-use. While some sizes are processing aids, others make the fiber have an affinity for a certain resin, if the fiber is to be used in a composite (Lubin, 100). Size is usually added at 0.5 –2.0% by weight. Winding then takes place at around 1000 m min –1 (Gupta, 544).
In staple fiber production, there are a number of ways to manufacture the fiber. The glass can be blown or blasted with heat or steam. Usually there fibers are made into some sort of mat. The most common process used is the rotary process. The glass enters the rotating spinner and due to centrifugal force are thrown out horizontally. The air jets push them down vertically and binder is applied. Then the mat is vacuumed to a screen and the binder is cured in the oven (Mohr, 13).
End uses for regular fiber glass are mats, insulation, reinforcement, heat resistant fabrics, corrosion resistant fabrics and high strength fabrics.
See also
Bibliography
- Gupta, V.B. and V.K. Kothari. Manufactured Fibre Technology. Chapman and Hall. London. 1997.
- Loewenstein, K.L. The Manufacturing Technology of Continuous Glass Fibers. Elsevier Scientific. New York. 1973.
- Lubin, George. Handbook of Fiberglass and Advanced Plastic Composites. Robert E. Krieger. Huntingdon NY. 1975.
- Mohr, J. G. and W. P. Rowe. Fiberglass. Van Nostrand Reindhold. Atlanta. 1978.
- Volf, Milos B. Technical Approach to Glass. Elsevier. New York. 1990.de:Glasfaser
he:פיברגלס es:Fibra de vidrio nl:Glasvezel ja:グラスファイバー pl:Włókno szklane tr:Cam elyafı