Free floating screed
|
|
The free floating screed is a device pioneered by Barber Greene Company in the 1930s that revolutionized the asphalt paving process. Barber Greene dominated the market until the patent expired in 1955, and now all major asphalt paver manufacturers use this design principle in their equipment.
The free floating screed has become standard because of the smoothing or averaging effect it can have on the existing base course. Since the only connection between the asphalt paver and the screed is the tow arm, the screed can "float" vertically relative to the paver. This allows the paver to traverse uneven ground while the screed floats over the material placed in front of it.
The free floating screed has a number of forces acting on it that, when in equilibrium, allow the depth behind the screed to be constant.
- Tow arm pull: the force exerted on the screed by the paver dragging it
- Mass: the weight of the screed
- Resistance of the head of material: the resistance from the pile of material in front of the screed
The angle at which the tow arm pull is exerted on the screed also contributes to the motion; its resultant force is either added or subtracted from the mass of the screed.
If each of these forces is constant, altering the angle of the screed to the horizontal (angle of attack) will control the amount of material extruded behind the screed. Increasing the angle angle of attack will cause the screed to climb higher through the pile of material, and therefore raise its trailing edge, increasing the amount of material extruded behind the screed. Similarly, reducing the angle of attack will reduce the amount of material extruded.
External link
- History of Highways, National Asphalt Pavement Association (http://www.hotmix.org/history.php/)