Aircraft
Two categoriesAircraft
fall into two broad categories: -
Heavier than air aerodynes, including autogyros, helicopters
and variants, and conventional fixed-wing aircraft: aeroplanes
in Commonwealth
English, airplanes in North
American English. Fixed-wing
aircraft generally use an internal-combustion
engine and propeller
or jet engine to provide
thrust, which moves the craft
forward through the air. The movement of air over the wings produces lift,
which allows the aircraft to fly. Exceptions are gliders
which have no engines and gain their thrust from gravity. That is, in order to
maintain their forward speed they must descend in relation to the air (but not
necessarily in relation to the ground). Helicopters and autogyros use a spinning
rotor (a rotary wing) to provide both lift and thrust. The abbreviation VTOL
is applied to aircraft other than helicopters that can take off or land vertically.
Similarly, STOL stands for Short
Take Off and Landing.
-
Lighter than air aerostats: balloons
and airships. Aerostats float in air in the same way that a ship floats in water,
by displacing the air around the craft with a lighter gas (helium
or hydrogen), or hot air.
The distinction between a balloon and an airship is that an airship has some means
of controlling forward motion and steering while balloons simply drift with the
wind.
See
also: List
of aviation, aerospace and aeronautical terms
There are several ways to classify aircraft. Below, we describe classifications
by design, propulsion and usage.
Also see this list of articles on particular aircraft
types, and this list
of aircraft.
Types of aircraft
By designA first
division by design among aircraft is between lighter-than-air and heavier-than-air
aircraft. Examples
of lighter-than-air aircraft include non-steerable balloons,
such as hot air balloons and gas balloons, and airships (sometimes called dirigible
balloons), such as blimps (which have a non-rigid construction) and rigid airships,
which have a rigid frame. The best-known type of rigid airship is the Zeppelin.
In heavier-than-air
aircraft, we can discern two major ways to produce the lift: aerodynamic lift
and engine lift. In the case of aerodynamic lift, the aircraft is kept in the
air because of aerodynamics,
usually by means of wings of some kind. With engine lift, the aircraft defeats
gravity by sheer engine power.
Examples of engine lift aircraft are rockets,
and so-called VTOL
planes, such as the Hawker
Harrier.
Among aerodynamically lifted aircraft, the largest number falls in the category
of fixed-wing
aircraft, where horizontal surfaces produce lift,
by profiting from the Coanda
effect (aeroplane or airplane).
In a "conventional" configuration, the lift surfaces are placed in front of a
control surface or tailplane.
The number of lift surfaces varied greatly in the pre-1950
period, as biplanes (two wings) and triplanes (three wings) were numerous in the
early days of aviation. Subsequently most planes are monoplanes.
The reverse configuration is the canard
type, where small horizontal control surfaces are placed forward of the wings,
near the nose of the aircraft.
Other possibilities include the delta-wing,
where lift and horizontal control surfaces are combined, and the flying
wing, where there is no separate vertical control surface (e.g. the B-2).
A variable geometry ('swing-wing') has also been employed in a few examples of
combat aircraft (the F-111,
Panavia Tornado,
and B-1 Lancer, among
others). The
lifting body configuration
where the body itself produce lift has been tested. So far the only significant
practical application of the lifting body was in the Space
Shuttle.
A second large category of aerodynamically lifted aircraft are the rotary-wing
aircraft. Here, the lift is provided by rotating rotors. The best-known examples
of this category are the helicopter,
the earlier autogyro,
and the tiltrotor aircraft
(such as the V-22 Osprey).
A further category
might encompass the wing-in-ground-effect
types, for example the Russian ekranoplan,
also nicknamed the "Caspian Sea Monster" and hovercraft,
most of the latter employing a skirt and achieving limited ground or water clearance
to reduce friction and achieve speeds above those achieved by boats of similar
weight. And
finally, the flapping-wing ornithopter
is a category of its own. These designs may have considerable potential but are
not yet practical.
By propulsion Some
types of aircraft, such as the balloon or glider, do not have any propulsion.
Balloons drift with the wind. For gliders, takeoff takes place from a high location,
or the aircraft is pulled into the air by a ground-based winch or vehicle, or
towed aloft by a powered "tug" aircraft.
Most early aircraft used a piston-engine with propeller as propulsion. Although
the configuration of the engine can vary (rotary, radial, inline), they all work
according to the same principles.
Just prior to World
War II, the first jet engines emerged. Different types exist, such as the
ramjet, pulse jet,
turbojet, and the turboprop,
the latter of which still uses a propeller.
By usage Three
major uses for aircraft may be seen: recreational, military, and commercial.
For recreation, almost
any type of aircraft can be used, although they are usually small ones. Gliders
and balloons are used almost exclusively for recreational purposes although they
have been used in times of war in the past. For instance, balloons were used for
observation in the American
Civil War and World
War I. Gliders were used to deliver troops into occupied territory during
World War II. The
first widespread use of military aircraft was for reconnaissance
and surveillance
in World War I. Soon they were adapted for attacking the ground or enemy vehicles/ships/guns/aircraft
as well, and the first bombers were born. In order to prevent the enemy from bombing,
fighter
aircraft were developed to intercept and shoot down enemy aircraft.
Eventually, two-seat trainers
were developed for the purpose of instructing new pilots. The use of transport
aircraft enabled the rapid movement of supplies, ammunition, cargo, troops and
also casualty evacuation; transport aircraft were also used to drop paratroopers.
Tankers are used to refuel
planes in mid-air, thus increasing their operational range. Commercial
aviation can be divided in passenger transport and cargo
transport. For the former, large planes have been developed that can transport
up to 500 passengers over large distances. Commercial cargo aircraft are often
similar to military transport aircraft, or might be adapted from the passenger
fleets of an earlier era.
Other uses include search-and-rescue operations (especially by helicopters), border
protection and water-bombing (fire-fighting). Further divisions can be drawn between
aircraft designs having a conventional (wheeled) undercarriage,
and amphibious floatplanes or flying boats.
Photographs, illustrations and clipart at Classroom
ClipArt.com |