Chrysler A engine
|
|
The Chrysler A engine is a small-block V8 automobile engine from Chrysler Corporation. It was produced from 1955 until 1967, when it was replaced by the improved wedge-head Chrysler LA engine and big-block Chrysler B engine. These two V8s look similar but differ in the height of the cylinder block deck, and have different cylinder heads (the A is polyspherical) and intake components. The A is also related to the hemispherical-head early Hemi engine of the same era.
| Contents |
Early "Semi-Hemis"
Plymouth offered polyspherical versions of Dodge's FirePower hemi for 1955 and 1956 before introducing a new engine family, the A-block, mid-way through 1956.
241
The 241 was Plymouth's non-hemi version of the 241 Dodge Hemi for 1955. Bore and stroke are the same at 3.44 in (87 mm) by 3.25 in (83 mm).
260
In the middle of 1955, Plymouth offered a bored-out, to 3.56 in (90 mm), 260 version.
270
The 270 was Plymouth's 1956 offering. Like its predecessors, it was closely related to the Dodge 270 Hemi. Bore was 3.63 in (92 mm) and stroke 3.25 in (83 mm).
Plymouth Polys
The real A-block family began with the 1956 Plymouth 277. This engine is important because it was modified with wedge heads (to become the Chrysler LA engine) and variants continue in production to this day. In fact, Chrysler's most notable modern engines, including the Dodge Viper's V10 and the new modern Hemi descend from this 1956 design.
277
The 277 was the first real A-block engine, sharing very little with the Dodge engines. It displaced 277 in³ (4.5 L) and was produced for 1956. Bore was 3.75 in (95 mm) and stroke was 3.12 in (79 mm).
303
The 1956 Plymouth 303 shared its crankshaft and piston rods with the 277 even though bore and stroke were entirely different at 3.81 in (97 mm) by 3.31 in (84 mm).
This engine was used in the following vehicles:
- 1956 Dodge Custom Royal (Canadian)
- 1956 Chrysler Windsor (Canadian)
- 1956 Plymouth Fury, 240 hp with 4 barrels
- 1957 standard on all 118 in wheelbase Dodges and Plymouths
301
The Plymouth 301 replaced the 277 in 1957. It was a 299.6 in³ (4.9 L) engine with a longer 3.91 in (99 mm) bore. Note that these dimensions are entirely different from the 1955 Chrysler 301.
313
A 313 in³ model was also produced for export. Bore was 3.88 in and stroke was 3.31 in.
This engine was used in the following vehicles:
- 1957 Dodge Custom Royal (Canadian)
- 1958-1964 standard on all 118 in wheelbase Dodges and Plymouths
318
The 318 was the longest-lived Chrysler A engine, produced from 1957 through 1966 when it was replaced by the LA 318. Plymouth was the only maker with this 318 for 1957 and 1958, but it was shared with the other Chrysler divisions after 1959. It was sized at 318 in³ (5.2 L) with the same 3.91 in (99 mm) bore as the 301 but a longer 3.31 in (84 mm) stroke.
A special 1957 dual-quad version used two four-barrel carburetors to produce 290 hp, making it the highest-output A engine. It was used in the 1957 Plymouth Fury 318.
Non-Plymouth Polys
300
The odd Chrysler 300 used a smaller bore, at 3.63 in, than the 303 but was otherwise similar. It was used in the 1955 Chrysler Windsor.
326
The big Dodge Red Ram 326 appeared for 1959. It used the same 3.31 in (84 mm) stroke as the 318 but shared the same large 3.95 in (100 mm) bore with the Chrysler 354 FirePower. It was used in the 1959 Dodge Coronet.
External link
- A engine link on Allpar (http://www.allpar.com/mopar/318.html)