Anchor bend
|
|
Missing image
AnchorBend_FinalKnot.jpg
AnchorBend_FinalKnot.jpg
Anchor bend
The Anchor Bend is a knot.
Canonical Name: Anchor Bend
Variant Name(s): Fishers Bend.
The Anchor Bend is used for attaching a rope to a ring or similar termination. It is a 'tie once, cut free knot' as it tends to lock and be extremely difficult to untie, for this reason it is usually only tied where it will rarely be necessary to release. It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn.
Missing image
AnchorBend_HowTo.jpg
AnchorBend_HowTo.jpg
Anchor bend step by step