Bridge circuit
|
|
A bridge circuit is a type of electrical circuit in which the current in a conductor splits into two parallel paths and then recombines into a single conductor, thereby enclosing a loop. It was originally used for measurement purposes, but can also be used in power supplies.
The best-known bridge circuit, the Wheatstone bridge, was invented by Samuel Hunter Christie and popularized by Charles Wheatstone, and is used for measuring resistance. It is constructed from four resistors, one of which has an unknown value, one of which is variable, and two of which are fixed and equal, connected as the sides of a square. Two opposite corners of the square are connected to a source of electrical current, such as a battery. A galvanometer is connected across the other two opposite corners. The variable resistor is adjusted until the galvanometer reads zero. It is then known that the ratio between the variable resistor and its neighbour is equal to the ratio between the unknown resistor and its neighbour, and this enables the value of the unknown resistor to be calculated.
In power supply design, a bridge circuit or bridge rectifier is an arrangement of diodes or similar devices used to rectify an electric current, i.e. to convert it from an unknown or alternating polarity to a direct current of known polarity.