How to make wine

Here is a quick summary on the process for making your own wine:

• Grow and harvest grapes.
• Remove stems and crush to release the juice. If using carbonic maceration, crushing is unnecessary.
• If making a white wine, press the juice off the skins. The juice that comes out from the pressure of the grapes alone is called "free-run" juice, and is generally saved and fermented separately. Some regions have regulations about how much juice may be pressed from a given mass of grapes.
• Optionally, allow the wine to rest under refrigeration (the cold prevents fermentation). This period of maceration helps extract the maximum amount of compounds out of the skins.
• Either induce fermentation with a yeast culture, or allow fermentation to start naturally with already-present yeast
• Keep the juice in a cool container (usually steel is used today, although home winemakers often use glass carboys), that has a small hole on top for the CO₂ produced by the yeast to escape. (Danger: your cellar may be filled with CO₂ gas, so please ensure good ventilation. It is a rare year when a cellar worker somewhere in the world does not drown after being accidentally suffocated and falling into the tank.)
• While fermentation is active in a red wine, the seeds and skins will rise to the top of the fermenting vessel. This "cap" needs to be kept wet to ensure maximum extraction. To achieve this, the cap is "punched down" at regular intervals.
• Optionally, either during alcoholic fermentation or afterward, induce malolactic fermentation. Many reds and some whites undergo this process to convert sharper malic acid to softer lactic acid.
• If making a red wine, at some point press the juice off the skins.
• When fermentation is complete, "rack" the wine off the settled yeast cells, called "lees". Or, leave it on the lees to age sur lie. Most winemakers add sulphur dioxide to prevent both oxidation and any further fermentation.
• Many solids suspended in the wine will settle out on their own, given a little time. However, this could take months, and does not always result in a crystal-clear wine. Commercial wines must be clear and not throw any sediment to be saleable. Fining agents such as bentonite or egg whites are used to remove these suspended solids. Filtration is also used, which can have a negative impact on the quality of the wine. However, it has also made the production of slightly sweet wines possible by removing all yeast cells.
• Optional: blend wines from different areas/years/grape types.
• Bottle the ready wine.